Browsing: Bluetooth

Barron’s: The Very Mixed Reality of Bragi’s Dash Wireless Headphones

Bragi's wireless ear pods reviewed by Tiernan Ray show the platform has a long way to go.


Read More

Sonova made a Big Splash here at The Hearing Blog, introducing the first 2.4 gHz all-digital "Moore's Law" 802.15.4 Bluetooth Low Energy 4.0 and 802.11 b/g/n WiFi radio chip, debuting in 2016… And we are quite


Read More

Today's Guest Article is on 2.45 gHz streaming audio by 802.11 WiFi as well as 802.15.4 Bluetooth 4.0 Low Energy ("BLE"), and the various ways both protocols coexist side-by-side both for audio streaming and control. This


Read More

The Digital “Moore’s Law” radio we first reported on in September 2012 will be the disruptive technology for wireless audio & data distribution to hearing aids & CI’s using the 2.45gHz ISM band via 802.11 WiFi


Read More

Sonova held their 2014 Capital Markets Day for European stock analysts on October 14th …And they were Not Impressed at all. First, expectations that new Phonak and Unitron “Venture” hearing aids would match ReSound/Cochlear1 and Starkey offerings with UHF digital


Read More
ReSound & Cochlear Wireless Accessory Compatibility

[SEE ARTICLE FOR LATEST UPDATES 4/17/2017] Over the last four years GN ReSound has released nine separate Unite wireless accessories for use with the Alera, Verso, LiNX and Enzo hearing aids, along with parallel models sold


Read More

Nucleus 6 CI users in North America: The FDA’s Medical Device branch in Maryland has finally approved the 2.4 gHz digital wireless accessories licensed from GN ReSound according to this bulletin from Cochlear Americas, a full


Read More

The Hearing Blog has held off on publishing ratings on the ReSound LiNX “Made for iPhone” (MFi) hearing aid due to current drain issues, as unlike the #13-powered Starkey Halo, the original version was released only in their 312-powered x61 RIC


Read More
Bluetooth 4.1 is coming on December 3rd, and it’s an improvement for hearing aids

  Bluetooth 4.1 is coming on December 3rd, and it’s an improvement for hearing aids and cochlear implants: Although not yet widely publicized, our friends at GeekWire have an exclusive look at what’s coming with Bluetooth


Read More

Part and parcel for direct iPhone communications to hearing aids & CI’s is support for the Bluetooth 4.0 Low Energy (“BLE”) protocol: Apple has had it in iOS for over a year; and now finally Google’s Android


Read More

On occasion we get very interesting reader comments; and this one from ReSound fires the first shot in the “Made for iPhone” War, Part 1 left by Hank is good enough to merit a separate article: I have the Verso


Read More

GN ReSound introduces the Phone Clip+ Bluetooth streamer, the first “Made for iPhone” device on the market… And The Hearing Blog has the review, including the discovery of a bug in the companion v1.0.0 Control app (article


Read More

Fifth in our “Made for iPhone” hearing aid series Several people who wear 5-6 year old hearing aids have written in asking if they should wait the 6-9 months for the “Made for iPhone” hearing aids


Read More

Moore’s Law, named after Intel co-founder Gordon Moore from his 1965 Electronics Magazine article, posits that the number of transistors on a chip will double about every two years. This has mostly held true for the


Read More

The Bluetooth 4.0 dominos are falling: Following up on our Apple Hearing Aid? Not So Fast…  post on Friday 14 September, we have this post from the Official ReSound Blog: Cochlear Adopts GN ReSound’s 2.4 GHz


Read More

What we at The Hearing Blog believe will be the foundation of the "Made for Apple" hearing aids by the Big Six hearing aid manufacturers, starting out with a discussion of telecoils and their shortcomings.
Read More